Railroad Industry

wheel mounting compound

Wheel Mounting Compound WM-10™

WM-10TM is an extreme-pressure compound for press fitting and mounting steel railroad wheels to their axles. WM-10TM contains Muscle Metal Treatment MT-10® technology for better lubricity, which enormously improves the ease of mounting and wheel-to-axle fitting, thus reducing alignment problems. WM-10TM is AAR approved.

  • Improves wheel-to-axle fitting
  • Reduces chatter & noise
  • Reduces alignment problems
  • Safer than linseed oil
  • Protects from friction, heat & wear
traction motor gear case additive

Traction Motor Gear Case Additive TM-10™

TM-10TM is a maximum-duty, metal-conditioning lubricant for adding to traction motor gear cases that need extra protection from extreme pressure. TM-10TM will increase gear service life while cooling the overall system. TM-10TM protects the gear metal from wear and damage caused by extreme pressure and friction-related heat. Contains Muscle Metal Treatment MT-10® technology for superior lubrication.

  • Extends gear system life in traction motor boxes
  • Protects gears from wear & damage
  • Reduces operating temperatures
  • Reduces downtime & maintenance
metal treatment mt 10

Metal Treatment MT-10®

The keystone of the Muscle product line is its anti-friction lubricant additive MT-10®. But this is not your ordinary additive – MT-10® treats the metal, not the oil. MT-10® is recommended for engines, transmissions, gears, bearings, pumps and other lubrication systems. When MT-10® is added to the existing lubricant, the moving metal parts of the system are polished and sealed, which reduces friction-related heat and wear. MT-10® promotes protection and will not build up or change tolerances.

  • Enhances equipment performance
  • Lowers operating temperatures
  • Decreases friction & wear
  • Protects internal parts

power lift grease

Power-Lift Grease PL-10™

PL-10TM is an anti-wear, extreme-pressure, lithium-complex grease with anti-friction additives. PL-10TM is unique because its formulation contains Muscle Metal Treatment MT-10® technology for superior lubrication. PL-10TM treats, seals and protects metal surfaces to dramatically reduce friction-related heat and wear.

  • Continuous operating temperature range: 0oF to 450oF (-17oC to 232oC)
  • Typical dropping point: 525oF+ (273oC+)
  • NLGI #2
  • Reduces operating temperatures
  • Extends equipment life
  • Protects from friction, heat & wear

industrial lubricants

Penetrating Oil SL-10™

SL-10TM is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10TM lubrication. SL-10TM quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10TM also provides long-lasting protection from rust and corrosion.

  • Fast-acting penetrating oil
  • Loosens seized & corroded metal mechanisms
  • Protects against rust & corrosion
  • Heavy-duty lubricating action

Railroad Lubricants

Diesel High Performance DHP-10™

DHP-10TM is a new generation, multi-functional, concentrated diesel fuel additive. DHP-10TM cleans injectors and minimizes deposit formation for continuous fuel flow, which results in improved fuel quality and performance. The lubrication characteristics of DHP-10TM protect pumps and injectors from wear and premature failure. Contains Muscle Metal Treatment MT-10® technology.

  • Improves fuel lubricity & quality
  • Lubricates, cleans & protects entire fuel system
  • Boosts cetane for improved fuel performance
  • Will not change sulfur ratings

fuel treatment

Fuel Treatment FT-10™

FT-10TM is a fuel additive for gasoline and diesel engines. FT-10TM dissipates moisture in the fuel system to enhance engine power, increase mileage and reduce harmful emissions. For continued performance and protection of your fuel system, use FT-10TM with every fill up. Contains Muscle Metal Treatment MT-10® technology. FT-10TM is also great for improving fuel oil furnace operation and inhibiting bacteria in bulk fuel storage tanks.

  • Cleans & protects fuel system
  • Increases mileage
  • Reduces harmful emissions
  • Complies with Federal sulfur content requirements of diesel engines
  • E-15 compatible

Industrial Lubricants

Air Tool Oil AT-10™

AT-10TM lubricates, cleans and protects piston and rotary type air tools. AT-10TM removes gummy deposits, stops rust, and repels air line moisture and water spray. AT-10TM will give your air tool more power and speed, smoother operation, and improved reliability. Contains Muscle Metal Treatment MT-10® technology.

  • Lubricates, cleans & protects
  • Stops & inhibits rust
  • Extends tool life
  • Repels air line moisture