Recreational & Outdoors

Muscle Lubricants

Firepower FP-10™

FP-10TM is the ultimate in total care and maintenance of firearms, weapons and weapon systems. FP-10TM cleans, removes lead, lubricates, guards against extreme pressure and wear, and protects from corrosion. FP-10TM contains Muscle Metal Treatment MT-10® technology for better lubricity, which improves bore accuracies due to reduced coefficients of friction between the bullet surface and rifling lands of the barrel. FP-10TM is also great for all your other sporting equipment lubrication needs.

  • Lubricates, cleans & preserves
  • Reduces weapon failure rates
  • Stops & inhibits rust
  • Keeps moving parts functional in adverse conditions
  • Eliminates stainless steel galling
  • Repels water & moisture

 

chain lube oil

Chain Lube Oil CL-10™

CL-10TM is a light oil that lubricates, cleans and protects – three functions formulated into one superior bike lube. CL-10TM is designed to withstand some of the most destructive and challenging cycling conditions. CL-10TM contains Muscle Metal Treatment MT-10® technology for a unique lubricating boundary film that not only protects the metal parts from wear, but diffuses dirt particles, repels moisture and protects against corrosion.

  • Lubricates, cleans & protects
  • Smoothes drive train operation for superior acceleration
  • Protects against rust & corrosion
  • Resists dirt, mud & grit accumulation
  • Repels moisture

 

metal treatment

Metal Treatment MT-10® Automotive Applications

The keystone of the Muscle product line is its anti-friction lubricant additive MT-10®. But this is not your ordinary oil additive – it treats the metal, not the oil. MT-10® is recommended for personal, commercial and fleet automobiles and trucks. When MT-10® is added to the existing oil, the moving metal parts of the engine are polished and sealed, which reduces friction-related heat and wear. MT-10® promotes protection and will not build up or change tolerances.

  • Enhances engine performance
  • Improves fuel mileage
  • Decreases friction & wear
  • Protects internal parts

 

power lift grease

Power-Lift Grease PL-10™

PL-10TM is an anti-wear, extreme-pressure, lithium-complex grease with anti-friction additives. PL-10TM is unique because its formulation contains Muscle Metal Treatment MT-10® technology. PL-10TM treats, seals and protects metal surfaces to dramatically reduce friction-related heat and wear. In addition to its automotive, industrial and marine applications, use PL-10TM on choke tube/barrel threads and front/rear baffles on center-fire suppressors.

  • Continuous operating temperature range: 0oF to 450oF (-17oC to 232oC)
  • Dropping point: 525oF+ (273oC+)
  • NLGI #2
  • Water resistant; low water washout
  • Reduces friction, heat & wear
  • Protects against rust & corrosion

 

penetrating oil

Penetrating Oil SL-10™

SL-10TM is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10TM lubrication. SL-10TM quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10TM also provides long-lasting protection from rust and corrosion.

  • Fast-acting penetrating oil
  • Loosens seized & corroded metal mechanisms
  • Protects against rust & corrosion
  • Heavy-duty lubricating action

 

fuel treatment

Fuel Treatment FT-10™

FT-10TM is a fuel additive for gasoline and diesel engines. FT-10TM dissipates moisture in the fuel system to enhance engine power, increase mileage and reduce harmful emissions. For continued performance and protection of your fuel system, use FT-10TM with every fill up. Contains Muscle Metal Treatment MT-10® technology. FT-10TM is also great for improving fuel oil furnace operation and inhibiting bacteria in bulk fuel storage tanks.

  • Cleans & protects fuel system
  • Increases mileage
  • Reduces harmful emissions
  • Complies with Federal sulfur content requirements of diesel engines
  • E-15 compatible

 

Muscle Lubricants

Moist-Out MO-10™

MO-10TM is a light spray lubricant, demoisturant and penetrating oil – all formulated into one superior product. Contains Muscle Metal Treatment MT-10® technology for increased boundary film lubrication. MO-10TM is great for your boating needs, protecting against damp and wet environments. Also great as a light, multipurpose lubricating oil.

  • Quick moisture displacement
  • Lubricates, penetrates & inhibits rust
  • Protects against corrosion
  • Creeps into hard-to-reach areas

 

Muscle Lubricants

Anti-Corrosion Lubricant ACL-10™

ACL-10TM is a general purpose lubricant and preservative. ACL-10TM polishes, seals and protects metal surfaces from extreme-pressure, wear and corrosion.  Contains Muscle Metal Treatment MT-10® technology for improved lubrication.
  • Keeps moving metal parts functioning in adverse conditions
  • Dramatically improves lubrication
  • Protects against rust & corrosion
  • Penetrates quickly for lubrication to remote areas